Stainless Steel Grades

Stainless Steel Grades


There are many different grades of Stainless Steel. The most common are 304 and 316. Some fasteners are also made in 303, 410, 420 and 430 as well as more corrosively resistant grades such as Bumax (2343) and 2205. The following is an approximate guideline.

Stainless Grades PREN Values Features/Benefits Useful For In Action
410 SS 11 A Martensitic grade that can be hardened by heat treatment Self-drilling (into metal) screws in non-coastal and less corrosive environments (e.g. interior use) Stainless Stairwell
420 SS 12
  • A nickel-free grade with high carbon
  • It is stronger than 410
Spring pins in less corrosive environments Stainless Spring Rolls
HARDTEC SS 16
  • A Martensitic alloy like 410 so can be hardened with heat treatment
  • Has Molybdenum added so offers much better corrosion resistance (similar to 304 grade)
Self-drilling (into metal) screws. Stainless Self Drilling Screws
304 SS 19
  • A general purpose grade
  • It is commonly used because it offers reasonable corrosion resistance, and is reasonably priced.
A variety of applications, including interior and non-coastal exterior applications which are hidden from sight (as it may tea-stain) Stainless Kitchen
316 SS 24
  • Good corrosion resistance
  • Needs fresh water/rainfall to wash off contaminants like sea salt to maintain surface corrosion resistance and avoid "tea-staining".
  • For exterior applications, including near the coast with the correct surface finish and proper maintenance.
  • Good material for handrails, downpipes and building fasteners.
Stainless Downpipes
BUMAX 88 & 109 25
  • A 316 grade with extra Molybdenum added
  • Usually made to high strength classes 80 and 100
  • Has excellent corrosion resistance
Where high strength and excellent corrosion resistance is required. Oil Rig
2507 SS 41
  • Super Duplex Stainless Steel
  • High strength
  • Fully resistant to localised corrosion (pitting/crevice corrosion) when immersed in seawater
Situations requiring high strength and very high corrosion resistance such as constant salt water immersion Submarine

Important WARNING! BEWARE OF LOW NICKEL STAINLESS STEEL
Some proprietary grades with high manganese and low nickel have found their way onto the market and are being sold as 304 or 316. Some are even stamped as such. These alloys also have low chromium and are not suitable for Australia's harsh conditions - especially coastal environments.

Environment Type 304 Type 316
Seafront Grade not recommended Monthly
Coastal (within 5km of the coast) Grade not recommended 6-12 months (wire: monthly)
Industrial and Urban 3-6 months 6-12 months (wire: 2-12 per year)
Suburban Rural Annually or as required by experience
Internal As required to maintain appearance

For more information see our Cleaning & Maintenance Guide

Learn Something New

To receive useful info and product updates add your details below

Anzor Wallchart

Wall Chart

Request a copy of our Engineering & Marine, or Construction Wall Chart.

Anzor Catalogues

Standard Catalogues

Click here to download a PDF of our Engineering Catalogue. This catalogue includes stainless fasteners and fittings, marine hardware and construction brackets.

Anzor Catalogues

Construction Catalogues

Click here dot download a PDF of our Construction Catalogue. This catalogue includes stainless/galvanized fasteners and fittings, and construction brackets.

You are subscribed to push notifications but they are not enabled in your browser.
Please either enable push notifications here or unsubscribe here.